Presa de stantare cu un cap de taiere automat

Acest cap de taiere cu retragere automata proiectat si fabricat de catre Suteau-Anver este acurat si silentios, si special proiectat pentru taierea materialelor non-metalice, in functie de hidraulica.

Este folosit la taierea materialelor flexibile cu una sau mai multe grosimi in role sau foi la o adancime de 3000 mm.

Domenii de aplicare: sintetice, textile, piele, garnituri, materiale flexibile, plastice, covor, fetru, cauciuc etc. Materialul poate fi aplicat din fata sau din spate folosind o rola dubla de alimentare.

Campul de lucru este complet protejat cu accesibilitate in fata.

Caracteristici tehnice :

Puterea de taiere utila : de la 80 T la 300 Tone
Viteza bratului, inainte si inapoi 52 m/mn
Acuratetea opririi bratului +/-5 mm
Lovitura ajustabila: 20 to 120 mm (220 mm in option)
Viteza taierii: 22 mm/s not adjustable
Inaltimea dintre masa si brat : 40 to 160 mm (250 mm in option)
Inaltimea campului de lucru: 940 mm

Puterea de taiere :

Range 2 cylinders : Working areas (mm) and powers (other working areas and other powers on request)

  • 1600 X 800 – 80T and 100T
  • 1600 X 900 – 80T andt 100T
  • 2000 X 800 – 80T and 100T
  • 2000 X 900 – 80T and 100T
  • 2400 X 800 – 80T and 100T
  • 2400 X 900 – 80T and 100T

Range 4 cylinders : Working areas (mm) and powers (other working areas and other powers on request)

  • 1600 X 900 – 130T/150T/200T/250T/300T
  • 1600 X 1200 – 130T/150T/200T/250T/300T
  • 1600 X 1500 – 130T/150T/200T/250T/300T
  • 2000 X 900 – 130T/150T/200T/250T/300T
  • 2000 X 1200 – 130T/150T/200T/250T/300T
  • 2000 X 1500 – 130T/150T/200T/250T/300T
  • 2000 X 2000 – 130T/150T/200T/250T/300T
  • 2000 X 2500 – 130T/150T/200T/250T/300T
  • 2400 X 900 – 130T/150T/200T/250T/300T
  • 2400 X 1200 – 130T/150T/200T/250T/300T
  • 2400 X 1500 – 130T/150T/200T/250T/300T

Options available on request :

  • Material drawn through by double roller
  • Material feed by pincers
  • Roller-holder (from 1 to 8 rollers or more on request)
  • Mechanical posi-stops (on machine with 2 and 4 cylinders)
  • System allowing to maintain the pressure (allowing to make thermocompression)
  • Servo-motor on the beam allowing to obtain in front of an accuracy +/- 0.2 mm
  • Block rotation system
  • Cutting on rectified tempered steel plate (with mechanical posi-stops)
  • Heating plate
  • Dimmable lighting
  • Die-holder above the beam
  • Die-holder under the beam
  • Machine without front cover
  • Telemaintenance
  • Designer version
  • Painting according to RAL colour