Receding head die cutting press – Model XPM

 This receding head die cutting press designed and manufactured by SUTEAU-ANVER is solidly-built, accurate and silent, and specially designed for cutting any non-metallic materials, depends on its built-in hydraulics.

It is used for cutting soft materials with one or more thicknesses into rolls or sheets up to a width of 3000 mm. Fields of application : synthetics, textiles, leather, gaskets, foam materials, plastics, carpet, felt, rubber, etc. The material can either be fed in from the front or from the back by, for example, using a double roller material feed. The work area is completely protected with accessibility at the front for greater proximity to the material.

Technical features :

Useful cutting power : from 80 T to 300 Tons
Speed of the beam, forward and back : 52 m/mn
Accuracy of beam stop : +/-5 mm
Stroke adjustable : 20 to 120 mm (220 mm in option)
Speed of cut : 22 mm/s not adjustable
Dayligth between table and beam(without die and without block) : 40 to 160 mm (250 mm in option)
Height of the work surface : 940 mm

Cutting power :

Range 2 cylinders : Working areas (mm) and powers (other working areas and other powers on request)

  • 1600 X 800 – 80T and 100T
  • 1600 X 900 – 80T andt 100T
  • 2000 X 800 – 80T and 100T
  • 2000 X 900 – 80T and 100T
  • 2400 X 800 – 80T and 100T
  • 2400 X 900 – 80T and 100T

Range 4 cylinders : Working areas (mm) and powers (other working areas and other powers on request)

  • 1600 X 900 – 130T/150T/200T/250T/300T
  • 1600 X 1200 – 130T/150T/200T/250T/300T
  • 1600 X 1500 – 130T/150T/200T/250T/300T
  • 2000 X 900 – 130T/150T/200T/250T/300T
  • 2000 X 1200 – 130T/150T/200T/250T/300T
  • 2000 X 1500 – 130T/150T/200T/250T/300T
  • 2000 X 2000 – 130T/150T/200T/250T/300T
  • 2000 X 2500 – 130T/150T/200T/250T/300T
  • 2400 X 900 – 130T/150T/200T/250T/300T
  • 2400 X 1200 – 130T/150T/200T/250T/300T
  • 2400 X 1500 – 130T/150T/200T/250T/300T

Options available on request :

  • Material drawn through by double roller
  • Material feed by pincers
  • Roller-holder (from 1 to 8 rollers or more on request)
  • Mechanical posi-stops (on machine with 2 and 4 cylinders)
  • System allowing to maintain the pressure (allowing to make thermocompression)
  • Servo-motor on the beam allowing to obtain in front of an accuracy +/- 0.2 mm
  • Block rotation system
  • Cutting on rectified tempered steel plate (with mechanical posi-stops)
  • Heating plate
  • Dimmable lighting
  • Die-holder above the beam
  • Die-holder under the beam
  • Machine without front cover
  • Telemaintenance
  • Designer version
  • Painting according to RAL colour